Inverter Drives

Lenze UK Frequency Inverters

Lenze 8200 Vector Inverters

Lenze 8200 VectorLenze Inverter Drives from 0.25 to 90Kw, 8200 vector for standard applications.

Compact dimensions saving users on space in control cabinet. Ideal use for customised cooling concepts offering push-through technique and cold plate technique versions with convenient operation handling diagnostics and communication systems.

Pluggable function modules can be used to integrate the Lenze 8200 vector into the control and automation to suit your machine or application needs. For operation, users can choose either plug-in Keypad XT operating module or a PC running Global Drive Control operator software.

Lenze 8200 vector device range comes complete for all systems

As the Lenze 8200 vector is a modular system it can be tailored to meet your individual requirements.

Functions and communication modules can be simply plugged into frequency inverter. The Lenze 8200 vector can communicate with most fieldbuses currently on the market.

A single inverter for all applications the Lenze 8200 Vector can be expanded to include mains chokes, RFI filters, motor filters or brake resistors.

Lenze 8200 Vector Features

  • PID controller, DC braking, motor potentiometer, slip and mains voltage compensation, load loss monitoring and much more.
  • Power range 0.25 kW...7.5 kW 230 V/240 V (+10 %)
    0.55 kW...90 kW 400 V/500 V (+10 %)
  • Overload capacity 180% rated torque for 60 seconds from 15 kW upwards, additional 210 % rated torque for 3 seconds
  • Operating modes: V/f linear, V/f quadratic, vector control, torque selection
  • Chopper frequency 1, 2, 4, 8, 16 kHz
  • Output frequency up to 650 Hz Input and output terminals
  • Up to 2 analog inputs, bipolar as an option (0-10 V, -10 V...+10 V, 0-20 mA, 4-20 mA; resolution 10 bits)
  • Up to 2 analog outputs (0-10 V, 0-20 mA, 4-20 mA; resolution 10 bits)
  • Up to 6 isolated digital inputs with logic that can be switched
  • Up to 2 digital outputs and one frequency output
  • Up to 2 relay outputs (also for direct 240 V AC mains connection)
  • Evaluation option for incremental encoders Fieldbus communication
  • RS232/485 serial interfaces, optical fibre version available as an option
  • Bus connection for most common fieldbus systems (CAN, PROFIBUS,
    INTER BUS, INTERBUS LOOP, LON, DeviceNet, CANopen, AS-Interface)
    Protection functions
  • Short-circuit-proof, earth-fault-proof during operation
  • Adjustable current limitation, over current warnings and fault indications
  • Overvoltage and under voltage protection
  • Frequency inverter over temperature warnings and fault indications
  • PTC or thermal contact input and It monitoring for motor protection
  • Motor phase failure detection
  • Integrated brake transistor up to 11 kW
  • Integrated radio interference suppressors to EN55011 Class A or B (device-dependent)

  • Lenze L-Force 8400 TopLine Inverter Drive

    Lenze 8400 Top Line Frequency InverterThe Lenze 8400 TopLine inverter drive is recommended for storage and retrieval units or pick and place applications. Fully equipped with everything needed for dynamic response and a high degree of precision; the Lenze 8400 TopLine can solve servo application problems with outstanding performance and efficiency. In addition, to a resolver input, there is also a multiple encoder input, that optimally supplements the spectrum of feedback system that can be used. The integrated axis bus easily implements electrical shaft and electronic gearboxes.

    Lenze 9300 Vector Inverter Drive

    The Lenze 9300 vector range of vector controlled frequency inverters is ideal for complex applications such as those found in dosing, filling and feeder systems as well as on winding drives. Functions blocks can be connected in accordance with user requirements enables the frequency inverter to behave like a PLC and take over open loop and closed loop control functions; in addition to managing the actual drive task. This function relives the burden on and the need for higher level controllers.

    Main Features of Lenze 9300 Vector

    • An easy-to-use interface facilitates operation
    • Predefined basic configurations speed up commissioning
    • High-performance standard product combines with a perfectly matched range of accessories
    • Power range between 0.37 and 90 kW

    Lenze SMV IP31 Frequency Inverters

    Lenze SM Vector Inverter DriveThe Lenze SMV IP31 frequency inverters are variable speed drives with simple operation and high sensor less vector performance in a power range between 0.25 to 30kW. The Lenze SMVector NEMA 1 (IP31) is the most common and cost effective drive enclosure for a wide range of applications including packaging, material handling, conveying positive displacement pumping, and HVAC systems.

    The Lenze SMV IP31 has fast dynamic torque response, sophisticated auto tuning and impressive low speed operations they meet most variable speed requirements.

    Lenze SMV IP31 Inverter

    • 240V ac 1 phase supply, 3 phase output 0.37 to 2.2kW
    • 400-480V ac 3 phase supply 0.37 to 30kW
    • 120V ac 1 phase supply with voltage doubler 3 phase output 0.37 to 1.1kW
    • on request models for 240V 3 phase input up to 7.5kW, and 600V supply

    Lenze SMV IP65 Enclosed Frequency Inverter

    Lenze SM Vector IP65 Inverter DriveThe Lenze SMV IP65 frequency inverters are sensor less vector variable speed drives in a power range from 0.37 to 22kw, suitable for tough conditions. Lenze SMV IP65 frequency inverters can be wall mounted in dusty, dirty and damp environments, even with low pressure jets, saving panel space and cost.

    The SMV IP65 inverter is available in two different enclosure material for indoor only use and for indoor/outdoor use. These rugged enclosure options are ideal for numerous industries including the food & beverage, waste water, chemical metering & processing and pharmaceuticals.

    SMV IP65 Inverter Range

    • 240V ac 1 phase supply, 3 phase output 0.37 to 2.2kW
    • 400-480V ac 3 phase supply 0.37 to 22kW
    • 120V ac 1 phase supply with voltage doubler 3 phase output 0.37 to 1.1kW
    • on request models for 240V 3 phase input up to 7.5kW and 600V supply

    Lenze SMD Frequency Inverter

    Lenze SMD Frequency Inverter DriveLenze SMD frequency inverters require just three face mounted operator buttons and a handful of parameters make installing the SMD inverter simplistic and easy to use. Parameter settings can be saved on the unique EPM module and copied to other drives of the same range as many times as required. The SMD inverter comes with integrated motor overload protection and a microprocessor to calculate speed control. The SMD inverter also features current limiting with frequency reduction for stable operation.

    The SMD inverter support operation between 0.25 and 22 kW. The SMD inverter series was designed to address the needs of a simple V/Hz drive that was suited for the global marketplace. The SMD inverter drives are consistent with the Lenze 8200 inverter drives in their design and packaging concepts and are manufactured to comply with standard for industrial automation.

    The Lenze SMD inverter drive with basic I/O is an IP20 enclosed drive available from 0.25kW to 4kW for input voltage of 200/230V 1or 3 phase.

    The Lenze SMD with full I/O is an IP20 enclosed drive available from 0.37 to 22kW for input voltage of 200/230V 1 or 3 phase and 400/480 VAC 3-phase.

    Office Address 

    21 Drakes Mews
    Crownhill Industrial Estate
    Milton Keynes
    MK8 0ER

    Tel: 0345 00 00 400

    Fax: 0345 50 48 566

    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

    Search Website

    Contact More Control