xComfort Heating Control
Menu

 

xComfort Heating Control Products

With xComfort both new and existing building can benefit from efficient energy saving heating control solutions and greater home automation.

CHAZ-01/12 Heating Controller 12 Zone

xComfort CHAZ-01/12 Under floor Heating Controller 12 Zone

CHAZ-01/12 Heating Controller

The xComfort CHAZ-01/12 is specially design for use with heating circuit distributors. The heating controller allows control of up to 14 to 230 solenoid valves for up to 12 different heating/cooling zones.

With the modern design of this unit it greatly saves on space and is easy to install.

The heating controller allows for specific set point zone control and the regulation of heating via a Home Controller or Room Manager device.

12 Channel Controller Main Features:

  • Control Up to 12 different zones
  • Integrated pump control / heat control
  • Suitable for heating & cooling systems
  • Suitable for NC and NO-systems

The CHAZ-01/12 output is equipped with a pump so it’s possible to connect the pump valve for both wired access to the funnel or wirelessly via a transmitter/receiver.


Temperature Reduction Switch CRCA-00/06 & 07

crca-00/06

CRCA-00/06 and (CRCA-00/07 with Hum sensor ) for Electric Heater Panels, are required for Multi Heating actuator (These are sending current temperature and set temperature to external unit, which does the controlling like the MV Heating Actuator)

xComfort Room Thermostats - CRCA-00/06 & 07

The CRCA-00/06 & 07 series of room thermostats are specially designed for panel heating systems (Dimplex heaters) offering direct control for multi heating actuators.

The thermostat is powered by x2 AAA batteries and is easy to setup anywhere for temperature measurement. Using the MRF software users can reference measurements to locate differences in heating/cooling allowing for accurate temperature measurement.

The CRCA-00/07 also comes included with a humidity sensor allowing for accurate measurement of humidity in the room.


xComfort RF Radiator Valve CHVZ-01/03

xComfort Radiator Valve

The Moeller RF Radiator Valve (CHVZ-01/03) is ideally used to control standard radiator valves in both residential and office use applications.

The Moeller RF Radiator Valve controls the room temperature. The drive moves a valve, to control the heat flow of the radiator. The Moeller RF Radiator Valve can be operated as a stand alone application or be in connection with a central device such as the Moeller Room Manager (actuator operation)

The RF Radiator Valve is fully programmable; battery powered which will fit in place of most commonly fitted TRV valves from Honeywell, Danfoss, Screwfit, B & Q, and Wickes.

The Moeller RF Radiator Value provides complete control of the temperature in a room, depending upon the time of day. This application saves on energy costs by only raising the temperature in a room when the room is in use. The programmable valve allows users to set different temperatures at different times of the day, ensuring maximum energy savings on heating costs.

For more information on the Moeller xComfort RF Radiator Valve contact us for a live demo and find out how much you can save on your heating today!

Office Address 

21 Drakes Mews
Crownhill Industrial Estate
Milton Keynes
MK8 0ER

Tel: 0345 00 00 400

Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Search Website